Subimods Hella Horn Harness Kit

Subimods Hella Horn Harness Kit

Now you can easily connect your Hella Horns to your Subaru with Subimod's PLUG & PLAY WIRE HARNESS! No more leaving the relay out because of difficulty and robbing your horns of full power!  Originally, when you purchased a set of Hella Horns, you receive the horns, a couple of flat stock brackets, and a relay.  Oh don't forget, instructions that are forever long.  You would think you would be able to purchase a product these days, and just the simple plug and play...Now you can!  With over 30 years of experience in Automotive Electronics, Subimods.com has designed its very own, ORIGINAL, Hella Horn Plug & Play Wire Harness Kit.  In a matter of mintues, just plug your Hella Horns in and start making some noise! 

NOTE: Our Hella Horn harnesses are designed to work with a standard 5 pin relay, if you do not have a 5 pin relay you need to add a relay at checkout, our harness will not work with a 4 pin relay will work but will cause the relay to stay engergized even when the car remains off (Battery Drain). We can not guarantee that the relay supplied with your Hella Horns is a 5 pin relay as is required with our harness, so we have now included with every harness a standard 5 pin relay that is needed to make our harness work properly.

Please refer to Hella's installation guide - Diagram 2b, they require a 5 pin relay for setup

 -There are seven connections total. The single wire goes to the factory horn wire.
- The four female blue connectors go to the horns, no particular order for these.
- The last two ring terminals go to your battery, ie red wire power and black wire goes to ground.

Be sure to check out our powder coated horns and horn bracket!